Conventional Fire Alarm Equipment

The Premier Elite 1 & 2 zone panels are the odeal entry-level panel system. Their low cost and simple installation will make them favourites for years to come.

The Premier Elite 4-8 zone fire alarm panels are ideal for small to medium sized installations. They meet all the requirements of EN54 parts 2 & 4, and come in an attractively styled enclosure.

The Premier SX control panel range is available in 1, 2, 4, 6 and 8 zones, housed in a light grey flame retardant ULV0 enclosure, designed to meet modern architecural surroundings, with a removable hinged door.

The Zonal Output card is designed to work with the Premier SX, Optima or Premier Elite control panels. the board connects to the repeater interface socket on the control panel display PCB via a 20 way ribbon cable.

The Premier Repeater Panel is a hard-wired repeater panel for use with the Premier SX (all sizes), and the Premier Elite (4-8 zones).

The Premier M Plus Control panels are designed to fulfill the requirements of EN54 part 2 and park 4 as well as being easy to install, operate and maintain.

The Premier 24M Plus control panels are designed to fulfil the requirements of EN54 parts 2 & 4 as well as being easy to install, operate & maintain.

The Fyreye optical smoke detector incorporates a pulsing infa red LED located in an optical chamber inside the detector. teh chamber is designed to eliminate the effect of any external light source.

The Fyreye Class A1R (rate of rise) heat detector operates by utilising a matched pair of thermistors to sense heat. One of these thermistors is exposed to the ambient temperature, while the other is sealed inside the detector housing.

The Fyreye "extra" range of conventional detectors have an extra LED to improve detector identification in an alarm condition. The 2 LED's allow an alarm to be observed from all angles.

The FEOE2000 is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC, plastic, foam and all similar materials which produce small visible particles.

The Fyreye "extra" range of conventional detectors have an extra LED to improve detector identification in an alarm condition. The 2 LED's allow an alarm to be observed from all angles.

The FEHE2000 is suitable for use in places where a smoke detector may cause unwanted alarms due to ambient smoke levels.

The FEUV2000 is the replacement for the ZTFD101 flame detector, that fits the standard fyreye bases.

There are 6 different Fyreye detector bases available for the conventional range, namely, common base, diode base, relay base and the 6" versions of these three bases. The common baseis used on systems that don't need to keep line integrity on head removal, and also on addressable systems.

Fyreye conventional sounder and sounder-flasher bases are designed to meet the increasing demand of having a sounder or flasher in each room that has a detector fitted.

The ZT-LE8 is the new-look remote indicator LED from Zeta Alarm Systems.

The Fyreye Reflective Beam Detector comprises a single unit incorporating an infr-red transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence. Should a predetermined level be reached, the detector will signal an alarm.

based on the proven technology of the standard Fyreye Reflective Beam Detector, the fyreye 5000 Auto-Aligning Beam Detector has been designed to help improve installation.

VS-200P, an intelligent UV/IR flame detector, this detector is well protected against the versatile false alarms, such as ARC welding, artificial light sources, etc.

The ZT-CP2 is the latest conventional call point from Zeta Alarm Systems. It has a modern design, and has been built to EN54 part 11.

the new ZT-BGU/WP is manufactured from aluminium with built-in push button activator. This unit is designed and meets the requirements to EN-54 part II.

the ZTBG/EXD explotion proof fire alarm control is a station with an integral terminal chamber. A push button actuator with a mushroom head is provided in the main chamber.

The miditone sounder is a small, high output conventional sounder from Zeta Alarms Systems. It is available in red or white.

The miditone sounder-flasher is the latest combined sounder flasher from Zeta Alarm Systems.

The Midi Xenon flasher is a compact xenon flasher designed to fit a 1 gang backbox.

The Securetone sounder is designed to be aethetically pleasing and unobtrusive.

The ZTSL6 range are the latest products designed to priovide a visual warning at alarm condition. lenses constructed of high-impact and heat resistant ACRYREX available in clear, amber, red or blue.

Zeta electronics sounders are ideal alternatives to fire bells. The electronic sounders produce a high sound level at a lower current consumption, making them ideal for reducing the battery standby capacity for a system.

The ZTSR/EXD is an explosion proof siren. In the main chamber intrinsically safe circuit is housed and it is duly wired up to terminal chamber through sealed bushes.

The Zeta motorised fire alarm bells combine styling and functional efficiency. They incorporate a low power rotary centrifugal mechanism, which gives a high sound output with low current consumption at 24V dc.

The ZTB8B/EXD is an explosion proof gong bell with a terminal chamber.

A highley reliable electric circuit is housed inside to control the frecuency of the gong operating spindle. The operating spindle and dish are made out of stainless steel thereby ensuring a long life.

The Zeta magnetic door holder is designed to retain a fire door open, against the force of its own closign device.

In the event of a fire, the door holder magnet can be tunred off by the fire alarm, allowing the door to shut.