Addressable Fire Alarm Equipment

The Simplciity Plus is the ideal introduction to the world of addressable fire alarm panels.

As it's name suggests, it has been designed with ease of use in mind, using pre-programmed values for its programming options. The installer simply needs to configure the loop, and enter text labels via the built in keyboard.

The Premier AD 2 loop analogue addressable fire alarm panel has been designed to be as simple to use as a conventional fire alarm panel.

It has 2 addressable loops, divided into 16 zones, and 4 conventional sounder circuits. The sounder circuits operate on common alarm, but can be individually tested or disabled.

The Premier Addressable Repeater panel is a serial repeater panel for use with the Premier AD Simplicity Plus Addressable Fire Alarm panels

The Premier AL range of control panels are built to EN54 Pt 2 & 4. The Premier AL is a fully configurable system, with all its zones & output functions fully programmable.

The Premier AL 8 loop analogue addressable fire alarm control panel has been designed because of the demand for larger centralised panels, rather than smaller panels distributed on a network.

The Premier AL is designed for systems that need more programability of the system outputs. It can be set up via a PC (RS232) or via the main control panel. It is networkable and can contain up to 600 loops. LPCB approved.

The FEAO2000 is an analogue addressable optical smoke detector that works to the Zeta Addressable protocol, compatible with Zeta Alarm System control panels only.

The FEAH2000 is an analogue addressable heat detector that works to the Zeta addressable protocol.

The FEAHH2000 is an analogue addressable high temperature heat detector.

The FEAOH2000 is a dual type detector, which reacts to both smoke & heat independently. It is suitable for use in places where traditionally an ionisation type detector may have been chosen.

The FEAOE2000 is particularly suitable for detecting optically dense smoke, involving materials such as soft furnishings, PVC plstic, foam and all similar materials which produce small visible particles.

The Fyreye "Extra" range of analogue detectors have an extra LED to improve detector identification in an alarm condition. The 2 LED's allow an alarm to be observed from all angles.

There are 3 different Fyreye bases available for the addressable range of detectors, namely Common Base, Isolator Base and Addressable Relay Base. The Common Base is now also available as a shallow depth (for use on sounder bases), or deep version (suitable for surface cabling).

The Zeta Addressable Common Base has been designed to meet the increasing demand of having a sounder and flasher in each room that has a detector fitted. All sounder bases on a loop will start at the same time, so will be suitable for phased evacuation. Available with a flasher & isolator.

on modern addressable fire alarm systems, the remote output of a detector may often be unavailable because it is used for another purpose, to drive a sounder base, or a relay base for example.

The ZTA-LE3 is a low cost alternative to the fully addressable remote LED indicator ZTA-LE2.

The Fyreye Reflective Beam Detector comprises a single unit incorporating an infa-red transmitter and receiver. The signal is reflected by a prism and analysed for smoke presence.

The ZT_CP2/AD is the latest addressable call point from Zeta Alarms Systems. It has a modern design, and has been built to EN54 part 11.

This Weatherproof Addressable Break Glass Unit is manufactured from aluminium in order to withstand harsh environments. It has a built in push button activator to signal an alarm activation.

The Miditone addressable sounder is small, high output sounder from Zeta Alarm Systems. It can be used on any panel using the Zeta Addressable protocol. It is available in red or white.

The Miditone Sounder Flasher is the latest addressable combined sounder flasher from Zeta Alarm Systems. It can be used on any panel using the Zeta Addressable protocol. It is available in red, amber, blue or clear.

The Securetone 2 addressable sounder is asmall, high output sounder from Zeta Alarm Systems. It can be used on any panel using the Zeta Addressable protocol. It is available in red or white. It replaced the previous Miditone & Securetone Models.

The Securetone 2 sounder flasher is the latest addressable combined sounder flasher from Zeta Alarm Systems. It can be used on any panel using the Zeta Addressable protocol. It is available in red flashing in clear plastic or red flashing in red plastic.

The Securetone Addressable Flasher completes the product range. It is amedium sized round style flasher suitable for many applications. It can be used on any panel using the Zeta Addressable protocol. It is only available in red.

The Maxitone Addressable Sounder & Sounder Flasher is a large horn sounder/flasher suitable for many applications. It can be used on any panel using the Zeta Addressable protocol.

The ZIU is used to interface any equipment that has a volt free normally open contact to a Zeta Analogue Addressable fire alarm control panel.

The Securetone Addressable Flasher completes the product range. It is amedium sized round style flasher suitable for many applications. It can be used on any panel using the Zeta Addressable protocol. It is only available in red.

The ZSCC and ZSCC/4 modules are used to connect conventional fire alarm devices (Bells, Flashers or Sounders) to a Zeta Addressable loop. Two versions are available, one has a single sounder circuit, the other has 4 sounder circuits. Both versions require a seperate 24V power supply.

Zone monitors are used to connect conventional detectors to an addressable loop. This may be for economic reasons (because conventional detectors are less expensive than addressable ones), or for technical reasons (The Required detectors may not be available in an addressable form e.g. Flame Detectors).